(678) 347-3362After the long summer season, winter has finally come. During the freezing winters, heating systems become our favorite electronic appliance in the house. And why not? After all, they keep us guarded against the cold breeze and maintain warm temperature levels.
It is why every homeowner wants to keep their furnace in perfect working conditions. However, it can only happen when you call experts for timely maintenance or furnace repair in Lawrenceville, GA.
7 Common Furnace Repairs You Must Keep in Mind
Here are some of the common furnace repairs and their related problems.
- Getting rid of dirty ductwork
As simple as the repair appears to be, everyone must be aware of it. Dust and debris might creep into your heating ducts from time to time. As a result, the amount of steam air you receive gets reduced.
- Changing or replacing filters
Your heating system contains a filter that keeps the indoor air and the ductwork clean. The air filter traps dirt, allergies, toxins, and other airborne contaminants.
While most people are aware of furnace filters, they are hardly unaware of how frequently the filters must be replaced. While the frequency usually depends on the filter type, replacing them every month or two is prudent. Also, you can check your furnace’s filter package for a more detailed timeframe.
- Making repairs to the starting mechanism
Every furnace contains a component that kick-starts the heating cycle. The type of mechanism is determined by the furnace.
It is commonly a spark light in older devices. Electrical ignitions rather than pilot lights are installed in newer furnaces.
The ignition or pilot light in your furnace can malfunction over time, and you may need to fix or replace it. When your furnace’s ignition or pilot light fails, your furnace may not turn on and heat your house.
- Blower bearing replacement
Your furnace has a compressor mechanism that pushes the heated air through the ductwork to warm your home. The set of roller bearings is one component of the blower system that can fail.
Ball bearings can get worse over time due to the constant usage of the furnace. They might potentially be damaged if fitted incorrectly as well.
- Heat exchanger replacement
You’ve probably never heard of it, but you should be thankful for your furnace’s heat exchanger.
A loop of heated tubes serves as the heat exchanger. Your furnace circulates air through these tubes to warm the air before directing it into your house. It is again one of the common components that may have issues.
- Putting the limit switch back together
The main switch is a component of your furnace that not only ensures the furnace’s proper operation but also ensures your safety.
A limit switch detects the temperature within the furnace. Also, it tells the extractor fan when to turn on and off, depending on the outside temperature. Check if it is functioning alright.
- Taking care of your thermostat
In certain circumstances, the issue with your furnace isn’t even the furnace’s fault. Your furnace’s thermostat monitors the temperature in your home. Based on the detected temperature, it instructs the heater to begin a heating cycle. When there is an issue with the thermostat, you may have to get it checked.
Diego HVAC LLC is one of the leading HVAC Contractors in Lawrenceville, GA, and our experts can look after all your diverse heating and cooling needs. To know more about our services, call us now at (678) 347-3362.
